Getting started with Ruby EventMachine

About this guide

This guide is a quick tutorial that helps you to get started with EventMachine for writing event-driven servers, clients and using it as a lightweight concurrency library. It should take about 20 minutes to read and study the provided code examples. This guide covers

  • Installing EventMachine via Rubygems and Bundler.
  • Building an Echo server, the "Hello, world"-like code example of network servers.
  • Building a simple chat, both server and client.
  • Building a very small asynchronous Websockets client.

Covered versions

This guide covers EventMachine v0.12.10 and 1.0 (including betas).


This guide assumes you are comfortable (but not necessary a guru) with the command line. On Microsoft Windows™, we recommend you to use JRuby when running these examples.

Installing EventMachine

Make sure you have Ruby installed

This guide assumes you have one of the supported Ruby implementations installed:

EventMachine works on Microsoft Windows™.

With Rubygems

To install the EventMachine gem do

gem install eventmachine

With Bundler

gem "eventmachine"

Verifying your installation

Let's verify your installation with this quick IRB session:

irb -rubygems

ruby-1.9.2-p180 :001 > require "eventmachine"
 => true
ruby-1.9.2-p180 :002 > EventMachine::VERSION
 => "1.0.0.beta.3"

An Echo Server Example

Let's begin with the classic "Hello, world"-like example, an echo server. The echo server responds clients with the same data that was provided. First, here's the code:

When run, the server binds to port 10000. We can connect using Telnet and verify it's working:

telnet localhost 10000

On my machine the output looks like:

~ telnet localhost 10000
Connected to localhost.
Escape character is '^]'.

Let's send something to our server. Type in "Hello, EventMachine" and hit Enter. The server will respond with the same string:

~ telnet localhost 10000
Connected to localhost.
Escape character is '^]'.
Hello, EventMachine
# (here we hit Enter)
Hello, EventMachine
# (this ^^^ is our echo server reply)

It works! Congratulations, you now can tell your Node.js-loving friends that you "have done some event-driven programming, too". Oh, and to stop Telnet, hit Control + Shift + ] and then Control + C.

Let's walk this example line by line and see what's going on. These lines

require 'rubygems' # or use Bundler.setup
require 'eventmachine'

probably look familiar: you use RubyGems (or Bundler) for dependencies and then require EventMachine gem. Boring.


class EchoServer < EventMachine::Connection
  def receive_data(data)

are the implementation of our echo server. We define a class that inherits from EventMachine::Connection and a handler (aka callback) for one event: when we receive data from a client.

EventMachine handles the connection setup, receiving data and passing it to our handler, EventMachine::Connection#receive_data.

Then we implement our protocol logic, which in the case of Echo is pretty trivial: we send back whatever we receive. To do so, we're using EventMachine::Connection#send_data.

Let's modify the example to recognize exit command:

Our receive\_data changed slightly and now looks like this:

def receive_data(data)
  if data.strip =~ /exit$/i

Because incoming data has trailing newline character, we strip it off before matching it against a simple regular expression. If the data ends in exit, we stop EventMachine event loop with EventMachine.stop_event_loop. This unblocks main thread and it finishes execution, and our little program exits as the result.

To summarize this first example:

Let's move on to a slightly more sophisticated example that will introduce several more features and methods EventMachine has to offer.

A Simple Chat Server Example

Next we will write a simple chat. Initially clients will still use telnet to connect, but then we will add little client application that will serve as a proxy between telnet and the chat server. This example is certainly longer (~ 150 lines with whitespace and comments) so instead of looking at the final version and going through it line by line, we will instead begin with a very simple version that only keeps track of connected clients and then add features as we go.

To set some expectations about our example:

  • It will keep track of connected clients
  • It will support a couple of commands, à la IRC
  • It will support direct messages using Twitter-like @usernames
  • It won't use MongoDB, fibers or distributed map/reduce for anything but will be totally Web Scale™ nonetheless. Maybe even ROFLscale.

Step one: detecting connections and disconnectons

First step looks like this:

We see familiar and EventMachine.start_server, but also EventMachine::Connection#post_init and EventMachine::Connection#unbind we haven't met yet. We don't use them in this code, so when are they run? Like EventMachine::Connection#receive_data, these methods are callbacks. EventMachine calls them when certain events happen:

  • EventMachine#post_init is called by the event loop immediately after the network connection has been established. In the chat server example case, this is when a new client connects.
  • EventMachine#unbind is called when client disconnects, connection is closed or is lost (because of a network issue, for example).

All our chat server does so far is logging connections or disconnections. What we want it to do next is to keep track of connected clients.

Step two: keep track of connected clients

Next iteration of the code looks like this:

While the code we added is very straightforward, we have to clarify one this first: subclasses of EventMachine::Connection are instantiated by EventMachine for every new connected peer. So for 10 connected chat clients, there will be 10 separate SimpleChatServer instances in our server process. Like any other objects, they can be stored in a collection, can provide public API other objects use, can instantiate or inject dependencies and in general live a happy life all Ruby objects live until garbage collection happens.

In the example above we use a @@class_variable to keep track of connected clients. In Ruby, @@class variables are accessible from instance methods so we can add new connections to the list from SimpleChatServer#post_init and remove them in SimpleChatServer#unbind. We can also filter connections by some criteria, as SimpleChatServer#other_peers demonstrates.

So, we keep track of connections but how do we identify them? For a chat app, it's pretty common to use usernames for that. Let's ask our clients to enter usernames when they connect.

Step three: adding usernames

To add usernames, we need to add a few things:

  • We need to invite newly connected clients to enter their username.
  • A reader (getter) method on our EventMachine::Connection subclass.
  • An idea of connection state (keeping track of whether a particular participant had entered username before).

Here is one way to do it:

This is quite an update so let's take a look at each method individually. First, SimpleChatServer#post_init:

def post_init
  @username = nil
  puts "A client has connected..."

To keep track of username we ask chat participants for, we add @username instance variable to our connection class. Connection instances are just Ruby objects associated with a particular connected peer, so using @ivars is very natural. To make username value accessible to other objects, we added a reader method that was not shown on the snippet above.

Let's dig into SimpleChatServer#ask_username:

def ask_username
  self.send_line("[info] Enter your username:")
end # ask_username

# ...

def send_line(line)
end # send_line(line)

Nothing new here, we are using EventMachine::Connection#send_data which we have seen before.

In SimpleChatServer#receive_data we now have to check if the username was entered or we need to ask for it:

def receive_data(data)
  if entered_username?

# ...

def entered_username?
  !@username.nil? && !@username.empty?
end # entered_username?

Finally, handler of chat messages is not yet implemented:

def handle_chat_message(msg)
  raise NotImplementedError

Let's try this example out using Telnet:

~ telnet localhost 10000
Connected to localhost.
Escape character is '^]'.
[info] Enter your username:
[info] Ohai, antares_

and the server output:

A client has connected...
antares_ has joined

This version requires you to remember how to terminate your Telnet session (Ctrl + Shift + ], then Ctrl + C). It is annoying, so why don't we add the same exit command to our chat server?

Step four: adding exit command and delivering chat messages


Let's test-drive this version. Client A:

~ telnet localhost 10000
Connected to localhost.
Escape character is '^]'.
[info] Enter your username:
[info] Ohai, michael
Hi everyone
michael: Hi everyone
joe has joined the room
# here ^^^ client B connects, lets greet him
hi joe
michael: hi joe
joe: hey michael
# ^^^ client B replies
# ^^^ out command in action
Connection closed by foreign host.

Client B:

~ telnet localhost 10000
Connected to localhost.
Escape character is '^]'.
[info] Enter your username:
[info] Ohai, joe
michael: hi joe
# ^^^ client A greets us, lets reply
hey michael
joe: hey michael
# ^^^ out command in action
Connection closed by foreign host.

And finally, the server output:

A client has connected...
michael has joined
A client has connected...
_antares has joined
[info] _antares has left
[info] michael has left

Our little char server now supports usernames, sending messages and the exit command. Next up, private (aka direct) messages.

Step five: adding direct messages and one more command

To add direct messages, we come up with a simple convention: private messages begin with @username and may have optional colon before message text, like this:

@joe: hey, how do you like eventmachine?

This convention makes parsing of messages simple so that we can concentrate on delivering them to a particular client connection. Remember when we added username reader on our connection class? That tiny change makes this step possible: when a new direct message comes in, we extract username and message text and then find then connection for @username in question:

# Message handling

def handle_chat_message(msg)
  if command?(msg)
    if direct_message?(msg)
      self.announce(msg, "#{@username}:")
end # handle_chat_message(msg)

def direct_message?(input)
  input =~ DM_REGEXP
end # direct_message?(input)

def handle_direct_message(input)
  username, message = parse_direct_message(input)

  if connection = @@connected_clients.find { |c| c.username == username }
    puts "[dm] @#{@username} => @#{username}"
    connection.send_line("[dm] @#{@username}: #{message}")
    send_line "@#{username} is not in the room. Here's who is: #{usernames.join(', ')}"
end # handle_direct_message(input)

def parse_direct_message(input)
  return [$1, $2] if input =~ DM_REGEXP
end # parse_direct_message(input)

This snippet demonstrates how one connection instance can obtain another connection instance and send data to it. This is a very powerful feature, consider just a few use cases:

  • Peer-to-peer protocols
  • Content-aware routing
  • Efficient streaming with optional filtering

Less common use cases include extending C++ core of EventMachine to provide access to hardware that streams events that can be re-broadcasted to any interested parties connected via TCP, UDP or something like AMQP or WebSockets. With this, sky is the limit. Actually, EventMachine has several features for efficient proxying data between connections. We will not cover them in this guide.

One last feature that we are going to add to our chat server is the status command that tells you current server time and how many people are there in the chat room:

# Commands handling

def command?(input)
  input =~ /(exit|status)$/i
end # command?(input)

def handle_command(cmd)
  case cmd
  when /exit$/i   then self.close_connection
  when /status$/i then self.send_line("[chat server] It's #{'%H:%M')} and there are #{self.number_of_connected_clients} people in the room")
end # handle_command(cmd)

Hopefully this piece of code is easy to follow. Try adding a few more commands, for example, the whoishere command that lists people currently in the chat room.

In the end, our chat server looks like this:

We are almost done with the server but there are some closing thoughts.

Step six: final version

Just in case, here is the final version of the chat server code we have built:

Step seven: future directions and some closing thoughts

The chat server is just about 150 lines of Ruby including empty lines and comments, yet it has a few features most of chat server examples never add. We did not, however, implement many other features that popular IRC clients like Colloquy have:

  • Chat moderation
  • Multiple rooms
  • Connection timeout detection

How would one go about implementing them? We thought it is worth discussing what else EventMachine has to offer and what ecosystem projects one can use to build a really feature-rich Web-based IRC chat client.

With multiple rooms it's more or less straightforward, just add one more hash and a bunch of commands and use the information about which rooms participant is in when you are delivering messages. There is nothing in EventMachine itself that can make the job much easier for developer.

To implement chat moderation feature you may want to do a few things:

  • Work with client IP addresses. Maybe we want to consider everyone who connects from certain IPs a moderator.
  • Access persistent data about usernames of moderators and their credentials.

Does EventMachine have anything to offer here? It does. To obtain peer IP address, take a look at EventMachine::Connection#get_peername. The name of this method is a little bit misleading and originates from low-level socket programming APIs.

A whirlwind tour of the EventMachine ecosystem

To work with data stores you can use several database drivers that ship with EventMachine itself, however, quite often there are some 3rd party projects in the EventMachine ecosystem that have more features, are faster or just better maintained. So we figured it will be helpful to provide a few pointers to some of those projects:

Riak and CouchDB talk HTTP so it's possible to use em-http-request. If you are aware of EventMachine-based non-blocking drivers for these databases, as well as for HBase, let us know on the EventMachine mailing list. Also, EventMachine supports TLS (aka SSL) and works well on JRuby and Windows.

Learn more in our EventMachine ecosystem and TLS (aka SSL) guides.

Connection loss detection

Finally, connection loss detection. When our chat participant closes her laptop lid, how do we know that she is no longer active? The answer is, when EventMachine detects TCP connectin closure, it calls EventMachine::Connection#unbind. Version 1.0.beta3 and later also pass an optional argument to that method. The argument indicates what error (if any) caused the connection to be closed.

Learn more in our Connection Failure and Recovery guide.

What the Chat Server Example doesn't demonstrate

This chat server also leaves out something production quality clients and servers must take care of: buffering. We intentionally did not include any buffering in our chat server example: it would only distract you from learning what you really came here to learn: how to use EventMachine to build blazing fast asynchronous networking programs quickly. However, EventMachine::Connection#receive_data does not offer any guarantees that you will be receiving "whole messages" all the time, largely because the underlying transport (UDP or TCP) does not offer such guarantees. Many protocols, for example, AMQP, mandate that large content chunks are split into smaller frames of certain size. This means that amq-client library, for instance, that has EventMachine-based driver, has to deal with figuring out when exactly we received "the whole message". To do so, it uses buffering and employs various checks to detect frame boundaries. So don't be deceived by the simplicity of this chat example: it intentionally leaves framing out, but real world protocols usually require it.

A (Proxying) Chat Client Example


Wrapping up

This tutorial ends here. Congratulations! You have learned quite a bit about EventMachine.

The documentation is organized as a number of guides, covering all kinds of topics. TBD

Tell us what you think!

Please take a moment and tell us what you think about this guide on the EventMachine mailing list or in the #eventmachine channel on what was unclear? What wasn't covered? Maybe you don't like the guide style or the grammar and spelling are incorrect? Reader feedback is key to making documentation better.